The flat surface on the top of table-height shelving allows you to create seasonal displays or use the space to show off favorite photos or mementos. Shelving with baskets of this height can easily be converted to a changing table for a new baby: just add a changing pad to the top and use the baskets for storing essentials like diapers and wipes. As your baby grows, you can remove the changing pad and use the baskets to store toddler toys, clothing and pull-ups.
A sample of a modular shelf design being marketed comes in solid wood with dark espresso finish. It has narrow shelving units which project a clean and versatile look. The modular series consists of 2 shelf-narrow, 2-shelf wide and 3-shelf wide sizes with matching woven baskets with wire frames as accessories. The shelving has measurements of 13.5 inches wide by 11.2 inches deep by 55 inches high.
Floor-supported garage shelving is another site-built option. One method for constructing these is to form upright supports by running vertical 2x4 boards every 50 inches. Each 2x4 should rest on the floor and be attached to a rafter or ceiling joist at the top. Then, additional 2x4 boards are attached horizontally on edge between the uprights and particle board is used to create the shelf. Dimensions are usually 19-25 inches deep with 25 inches between each shelf. These are only suggested dimensions and can be adjusted to better accommodate the size of the items that will be stored.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does not4.us claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.